Pete, broadly in matching theory, a series-capacitor match can often be
replaced with a series L and shunt C to ground.
Often the topology will be chosen on component value reasonableness and
convenience of what's grounded where. Other times you might have a strong
preference for a matching network with hi-pass vs lo-pass characteristics.
In the specific case of my 160 transmit antenna, the series-capacitor
solution was some ridiculous value. And I found that series L with shunt C
had more workable component values with the added advantage that a regular
old air variable could be used for the C and tuned to accommodate large
QSY's from top to bottom of the 160M band.
OTOH if you have vacuum variables laying around you may find that a more
convenient solution for you.
Tim N3QE
On Sun, Sep 1, 2019 at 2:46 PM N4ZR <n4zr@comcast.net> wrote:
> The other day a ham friend suggested using a coil ("hairpin") to match
> the low impedance of a well-radialed inverted L to 50-ohm coax. This
> struck me as a potentially-attractive alternative to a series vacuum
> capacitor, but I don't know enough to evaluate it. Thoughts?
>
> --
>
> 73, Pete N4ZR
> Check out the Reverse Beacon Network
> at <http://reversebeacon.net>, now
> spotting RTTY activity worldwide.
> For spots, please use your favorite
> "retail" DX cluster.
>
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband
> Reflector
>
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|