To: | topband@contesting.com |
---|---|
Subject: | Topband: Beverage Antenna Tuning |
From: | Ashraf Chaabane <ash.kf5eyy@gmail.com> |
Date: | Wed, 4 Jul 2018 15:13:27 +0100 |
List-post: | <mailto:topband@contesting.com> |
Hi All I measured the SWR in my beverage antenna; the SWR fluctuates between 1.5 and 3 in a range of 1.8 to 7 MHz. (See: https://drive.google.com/drive/folders/0B9AtNpPfAOUMRDNsaXROMG1VUTg?usp=sharing ) I know SWR should not vary too much. However, some people are suggesting adjusting the termination resistor. Others suggest checking the transformer number of windings for a good match. What shall I do? 73 Ash 3V8SS/KF5EYY _________________ Topband Reflector Archives - http://www.contesting.com/_topband |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Topband: Radial plate, Mike Furrey |
---|---|
Next by Date: | Re: Topband: Beverage Antenna Tuning, Joe Subich, W4TV |
Previous by Thread: | Topband: Baker Isl News, wb6rse1 |
Next by Thread: | Re: Topband: Beverage Antenna Tuning, Joe Subich, W4TV |
Indexes: | [Date] [Thread] [Top] [All Lists] |