Topband
[Top] [All Lists]

Re: Topband: Best way to jury rig a quick 160m contest antenna?

To: "Richard (Rick) Karlquist" <richard@karlquist.com>
Subject: Re: Topband: Best way to jury rig a quick 160m contest antenna?
From: Tree <tree@kkn.net>
Date: Thu, 23 Jun 2016 08:36:54 -0700
List-post: <topband@contesting.com">mailto:topband@contesting.com>
You are not going to work a lot of multipliers in the IARU contest on 160
meters - even if you had "real" antennas for the band.

I would suggest either just loading up your 80 meter antenna and working
one or two mults and then go back to focusing on the other bands.  The idea
of using it against ground is a proven method for doing this (as previous
posted).

73 Tree N6TR

On Wed, Jun 22, 2016 at 8:52 PM, Richard (Rick) Karlquist <
richard@karlquist.com> wrote:

>
>
> On 6/22/2016 6:29 PM, Mike Smith VE9AA wrote:
>
> Maybe a plastic switchbox of some kind that shorts the 2 leads of the 80m
>>>
>> vee together (to give you a radiator-The center)
>>
>> and another switch to short the 40m vee together for one raised radial-The
>> braid?  Can I match this mess with the tuner in a K3?
>>
>>
> If you are going to do this, you need to make sure that the
> inverted vee's do NOT use current baluns/common mode chokes.
> "Voltage baluns" are probably OK.
>
> Also, you need to have a multiple of an electrical half wave
> length of coax in order for the trick of shorting the center
> conductor to the shield to work right.  If it is an odd
> multiple of a quarter wave, it will not work at all.
>
> I would advise you not to bother; too much trouble.
> "Quick" and "160 meter antenna" should probably not be in
> the same sentence, especially with many constraints.
>
> Rick N6RK
>
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>