Re: Topband: Termination resistor for 160-80- Pennant antenna (Receive only)

[wb6rse1@mac.com]

On Sep 5, 2011, at 9:50 AM, allan1@dejazzd.com wrote:

The 160-80 pennant antenna calls for a 900 ohm termination resistor.  Since 900 
is not a standard resistor value, what is the best way to accomplish this?  Not 
enough room for a beverage at this qth!

Thanks

Allan W2TN
________

The K6SE design I use for my 29 ft x 14 ft flag, calls for 950 ohms. The 
dimensions of the flag were optimized for both 160 and 80.  I used two 470 ohm 
2 watt 5% metal oxide resistors in series. I get 30dB F/B when checked against 
local BC stations. The flag works very well on a rotator on my roof about 22 ft 
high.

GL - Steve WB6RSE
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK