OK, for a single-wire Beverage I realize that sloping
the ends down over the last 60+ feet of the Beverage
is no improvement over dropping them straight down.
For a 2-wire Beverage, which is preferred?
1) Putting the reflection transformer up in
the air and running the ground wire straight
down to the ground rod(s) (~ 6.5 feed); or
2) Running the two wires at the end of the Beverage
straight down (~6.5 feet) to the reflection
transformer, with the ground rods nearby.
73,
Jeff Maass K8ND
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|