I am sitting here looking at my new 800 Yaesu rotator and all 4 parts, 2
clamps for the upper and 2 clamps for the lower that I have all have the
same appearance and even the same identical part number on them.
PC-8601-040.
So if the 1000 follows the same convention you are able to swap the tops and
the bottoms. Would be interesting to know if they share the same parts
between 800 and 1000.
----- Original Message -----
From: "Malcolm Ringel" <mringel@bluecrab.org>
To: <TOWERTALK@contesting.com>
Sent: Tuesday, July 12, 2005 8:02 PM
Subject: [TowerTalk] Yaesu Rotator mast clamps
> I have cracked one of the mast clamps on my G1000SDX rotator. Can anyone
> verify whether or not the "optional lower mast bracket" (apparently for
use
> with a non tower mount) is the same as the upper/top clam-shell
arrangement
> ? The sketch in the manual looks identical; anyone in this group know for
> certain ?
> Many thanks & 73,
> Malcolm, K3KZ
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|