How does that work running a high power amp?
73, Keith NM5G
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Don Havlicek
Sent: Wednesday, December 20, 2006 3:28 PM
To: Craig Thompson
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] Radio Frequency Systems Cable
This has been done often in the past:
put a transverter for your particular band AT the antenna and use cheaper
coax to run to your HF rig.
Don
N8DE
Craig Thompson wrote:
>I am considering a low loss coax for VHF and UHF on a 90 foot motorized
tower. It has to be flexible, high power and low loss. I found a 1 1/4" coax
by RFS RFS UCF114-50JA. It is not cheap. Has anyone had any experience with
this cable? I have used LMR600UF but it is too lossy for EME up to 1296. Do
you have any other suggestions?
>
>Thanks, Craig
>K9CT
>
>
>
>
>
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|