Cutting the wire changes the effective diameter (and there's that
capacitance/inductance effect between the two conductors) which changes the
resonant frequency, so what was tuned before, is no longer tuned to the same
place.
I'm sure that one could do some experimenting and find a suitable
correction, but, then:
Laziness also plays a significant role.
----- Original Message -----
From: "Keith Dutson" <kjdutson@earthlink.net>
To: <towertalk@contesting.com>
Sent: Wednesday, December 01, 2004 8:22 AM
Subject: RE: [TowerTalk] adjusting insulated wire dipole
> Once tuned as desired, why not cut the wire at the outer bend point? The
> only negative that comes to mind is if the resonant frequency rises over
> time due to environmental changes (e.g. new metal structures erected
> nearby).
>
> Keith
> NM5G
> VP8DXL
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|