I have been using 9913 for many years. This past year I checked all of my
coax to see how it has fared over the years. I had originally measured the
loss of the RG213, 9913 and hardline on 10m when I installed it. I checked
it under the same conditions. No measurable difference.
Just to be on the safe side, I cut off the PL-259's on each end. Center
conductor and shield were still shiny. Installed new PL-259's.
I have and continue to use Scotch 33 as the sealer for all my connections.
It sure seems to work.
Tony
N2TK
-----Original Message-----
From: towertalk-admin@contesting.com
[mailto:towertalk-admin@contesting.com]On Behalf Of WW4T@aol.com
Sent: Thursday, May 30, 2002 19:21
To: f5vhn@yahoo.com; towertalk@contesting.com
Subject: [Towertalk] 9913(Hosepipe), weatherproofing and connectors.
I think you will find that 9913 coax actually "inhales" water.....probably
through the jacket itself, and of course some egress is possible through
poorly weatherproofed connectors. The hollow core of the 9913 allows for the
air trapped inside during manufacturing and installation to contract and
expand with weather changes, and with the nominal cooling and heating
taking
place fom daytime to night time, and seasonal changes, its a neverending
process. This contraction and expansion apparently allows for minute amounts
of humid air to be sucked through the jacket, and condenses inside the
hollow
core. The jacket is porous enough to allow for the vapor to come in, but
over
time as the moisture accumulates, its impossible for the condensate to go
back the route it entered, and the amount continues to grow with each
heating
and cooling cycle........its notorious down here in the ultra humid Southern
United States. This is why you see high priced "hardline" that is
pressurized
with nitrogen in hollowcore, high power applications. Even "dryers" are
employed on occasion. Of course, foamfilled hardlines dont have that
problem.
73 Bob ww4t@aol.com
========Original Message========
Subj: [Towertalk] 9913(Hosepipe), weatherproofing and connectors.
To: <towertalk@contesting.com>
Date: 5/30/2002 3:39:13 AM Eastern Standard Time
From: <A HREF="mailto:f5vhn@yahoo.com";>f5vhn@yahoo.com</A>
To: <A HREF="mailto:towertalk@contesting.com";>towertalk@contesting.com</A>
Sent from the Internet (Details)
Hi Steve,
You touched on weather proofing 9913 (Hosepipe as its
called in the UK).
Would you care to share some of your expertise in this
matter. Especially as UHF connectors are not weather
proof.
PLUS, I'm planning on using normal N-type and UHF
connectors on my run of 9913. I know they are the
wrong size but I can't source any connectors for this
cable and I already have the others. I will have to
make them fit buy filing down the inner conductor a
bit. Hey, this IS an amateur installation, where some
DIY is allowed and cost is a factor.
Any body any comments.
Thanks, Robert.
F5VHN@yahoo.com
__________________________________________________
Do You Yahoo!?
Everything you'll ever need on one web page
from News and Sport to Email and Music Charts
http://uk.my.yahoo.com
_______________________________________________
Towertalk mailing list
Towertalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
---
_______________________________________________
Towertalk mailing list
Towertalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|