First, forget the impedance mismatch, for hf use it is absolutely
insignificant. Then follow the comments some others have made about using
plumbing fittings to make your own connectors, cover them with lots of duct
seal available cheap at the same hardware stores and enjoy them for years to
come.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> -----Original Message-----
> From: towertalk-bounces@contesting.com [mailto:towertalk-
> bounces@contesting.com] On Behalf Of Gedas
> Sent: Sunday, June 05, 2005 01:29
> To: towertalk@contesting.com
> Subject: [TowerTalk] Using 75 Ohm Hardline
>
> Hi everyone. I was wondering if someone could recommend an easy and
> elegant method that would allow me to use a bunch of 7/8" 75 ohm hardline
> I have. My antennas on 2 of 3 towers require over 270' runs and I would
> like to use this very nice hardline. On VHF and UHF I built custom 1/4
> wave transformers which have worked perfect for years but for my tribander
> that approach will obviously not work. Any ideas?
>
> 73,
> Gedas, W8BYA
>
> online image gallery at http://gedas.cc
> e-mail address at w8bya@w8bya.com
> web page at http://www.w8bya.com
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|