Towertalk
[Top] [All Lists]

Re: [TowerTalk] 40 Meter Vertical

To: <n8de@thepoint.net>, "Paul Sturpe" <sturpe@embarqmail.com>
Subject: Re: [TowerTalk] 40 Meter Vertical
From: "Roger (K8RI)" <K8RI-on-TowerTalk@tm.net>
Date: Sat, 1 Dec 2007 12:33:51 -0500
List-post: <mailto:towertalk@contesting.com>


> Paul,
> Many years ago, Dentron sold a 40m vertical just as you describe.
> I have 5 of them .. three are in place, and the other two are under 8"
> of snow.

I had a couple of those as well.  As I recall they were either 1 1/4 or 1/2 
at the base and roughly 33' tall. Bout as flexible as a fishing pole, but I 
never had one fail.  Simple, not all that expensive and worked well. arn 
near got electrocuted of one of the ground radials tied to an 8' ground rod 
too. That was before GFIs and a short in a Yaesu FT-101B put the 110 to the 
coax shield. The vertical was far enough from the house electrical ground it 
didn't trip, but it sure did bite!  No that was in the days when few had 
heard of a single point ground let alone used one.


> We have up to 18" more forcast for today and tomorrow, so will have to
> wait until it all melts or blows away to dig out the other two and
> measure the diameters/lengths.

And wait for the ice to melt.  We're on the edge so we don't really know how 
much will be snow, ice, or rain.
OTOH it's supposed to warm up to near 40 with rain and 20 to 30 MPH winds 
tomorrow (Sunday)so there shouldn't be much snow left by nigh fall.

Roger (K8RI)

> When I can, you'll get the info.
> Don
> N8DE
>
> Quoting Paul Sturpe <sturpe@embarqmail.com>:
>
>> I am looking for a design for a full size 40 meter, 1/4 wave, self
>> supporting vertical.
>>
>> I am thinking that telescoping aluminum tubing is the best way to go, but 
>> I
>> am not sure what sizes are needed in order to be self supporting (no 
>> guys.)
>>
>> It has been suggested that I simply use half of an element from the 40 
>> meter
>> yagi as described in the ARRL antenna book.  This in fact would work, but 
>> is
>> probably design over kill for a vertical.
>>
>> Does anyone know of plans for a design that meets my criteria?
>>
>> Paul, W3GQ
>>
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>