----- Original Message -----
From: "Jan Erik Holm" <sm2ekm@telia.com>
To: <towertalk@contesting.com>
Sent: Monday, August 11, 2003 8:49 AM
Subject: [TowerTalk] Re: Antenna element vibration damping - How
>
>
> Jiri Sanda wrote:
> ,>
> > To later responses.
> > Jan - I would like to see some designs that DOES NOT vibrate at all.
> > Until now I have not seen such a beast !!!
> > To kill the vibration with some rope or wire is fairly easy and does not
> > represent any significant cost or problem to put in.
> >
> Yes I know. The first Yagi I built 30 years ago lost the elements after
> just 2 weeks due to vibrations/resonance, was then fixed with ropes since
> at that stage I didn?t know better.
> These days I don?t need ropes since my elements doesn?t vibrate.
***
**** Some still vibrate after 30 years...... HA HA HA.
***
> > I would like to understand how rivets - no rivets can have the smallest
> > influence on vibration. With my dummy head I can not see any physical
> > reason.
> >
> Me too!!! I never did say so. I didn?t like rivets due to other reasons.
> >
> > Just according to my experience drilling a hole into the element is very
> > bad, but it is another story......
> >
> Yes ofcourse it is but sometimes bad things has to be done, ofcourse
> it will weaken the element at the point where the hole is.
> >
> > During the years I have had quite a couple of various elements - right
> > know I (we - together with OK1RF) maintain close to 100 HF elements.
> >
> Yes I know you have a big installation, good luck with it.
> >
> > 73 !
> >
> > Jiri
> > OK1RI
> >
> 73 Jim SM2EKM
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
|