Another approach (which might be useful for remote bandswitching using the
stepped voltage output of radios like the FT-817) is to use a LED bargraph
chips (LM3914?) to measure the voltage, rather than a stack of comparators.
Tie the relay control to one or more of the LED outputs of the chip.
----- Original Message -----
From: "Rick Karlquist" <richard@karlquist.com>
To: <towertalk@contesting.com>
Sent: Friday, January 21, 2005 5:58 PM
Subject: [TowerTalk] Remote RF coax switch utilizing DC on coax
> Several people have asked about my beverage switching scheme.
> I send a different DC voltage down the coax for each antenna
> and have a circuit at the end that detects the different
> voltages with comparators and activates an RF relay to select
> an antenna. I have posted an article about it at:
>
> http://www.n6rk.com/Comparator_RF_switch.pdf
>
> Rick N6RK
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|