Elliott,
Yes, that Wireman #306 cable is what I used for my Orion 2800 in 2013. Has
been solid so far, turning a SteppIR DB42.
73,
Steve
N6SJ
-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of Richard Thorne
Sent: Monday, December 9, 2019 1:04 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Orion 2800 Rotator Cable Replacement
Elliot,
Check thewireman.com They have cable specifically for the Orion 2800. It's
part # 306.
Dxengineering carries part DXE-CW1812OR for the 2800. That cable has an extra
ground wire.
Rich - N5ZC
On 12/9/2019 2:50 PM, Elliott Lawrence via TowerTalk wrote:
> My antenna refresh project is moving along. The Orion 2800 was installed in
> 2007 and has functioned flawlessly. Since I am replacing the coax it dawned
> on me that I should also replace the rotator cable. Can’t inspect the
> condition of the jacket etc but probably needs changing.
>
> Suggestions on sources would be appreciated. Orion recommends Belden 9405
> but I definitely need cable that is very UV tolerant here in Southern
> California.
>
> Thanks es 73,
> Elliott WA6TLA
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|