Using a transit is probably the best way to determine tower plum. I was a
professional team from Sacramento do that on a 100' commercial tower I had
installed for broadcast use. Buying one may be out of the question, but I
think you can rent them from most equipment rental places.
Ron
N6AHA
-----Original Message-----
From: Rick Bowden <ki5vz@flash.net>
To: Rush Johnson <W4QA@charlotte.infi.net>
Cc: Towertalk Reflector <towertalk@contesting.com>
To: <towertalk@contesting.com>
Date: Friday, March 12, 1999 10:11 AM
Subject: Re: [TowerTalk] Plumbing a 100' 45G
>
>Hi all The commercial tower companies that I am familiar with use a transit
>. To true a tower . But I don't think most of you would want to go out and
>spend 5 or 6 hundred dollars for a transit . A carpenters level is the best
>way to do it if you don't have a transit . Start at the bottom set of guys
>and work your way up .
>73's Good luck
>Rick KI5VZ
>Rick's Tower Service
>(972) 539-0295
>
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|