Towertalk
[Top] [All Lists]

Re: [TowerTalk] MOV surge protection

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] MOV surge protection
From: "K8RI on TowerTalk" <K8RI-on-TowerTalk@tm.net>
Date: Sat, 9 Dec 2006 21:32:21 -0500
List-post: <mailto:towertalk@contesting.com>
----- Original Message ----- 
From: "Jim Jarvis" <jimjarvis@optonline.net>
To: <towertalk@contesting.com>
Sent: Friday, December 08, 2006 5:46 PM
Subject: [TowerTalk] MOV surge protection


>
> It would seem to be a reasonable product differentiation
> strategy for Square D or someone to produce a distribution
> panel with replaceable surge protectors built in.
>
> I'm about to replace the 150A service in this old house, and
> would spend a few hundred more to have that capability.

I don't know if you can still find the *big* MOVs, but they must still be 
available. They have an Aluminum bottom plate that can be bolted right to 
the ground buss. Bolt 'em in and tie one to each side of the buss.  It'd be 
a simple addition if the inspector will pass it.

It'd be interesting to see how well something like this would work to keep 
spikes from coming in on the power mains

I have a problem visualizing how I could maintain a single point ground 
system doing this, but OTOH *most* of the electronics in the house, with the 
exception of the TV ties into a single point ground system.  Even the 
satellite and TV antennas come in through that point, but the grounds for 
the TV and stereo come from the far corner of the house. They may all 
*eventually* go to the same place but they really need to be the same 
length.


Roger Halstead (K8RI and ARRL 40 year Life Member)
N833R - World's oldest Debonair CD-2
www.rogerhalstead.com 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>