Does anyone have a manual for the Yaesu GS-23 RS-232 board for the SDX
series rotator controllers? I found a text only version of it online, but
that doesn't help with figuring out the baud rate setting which is
apparently in an illustration.
Also, can anyone confirm that the same transformer is used in the G-1000SDX
controller as the G-2800SDX controller?
I have a G-1000SDX box to use with a 2800 rotator; the 1000SDX transformer
appears to be the same size as the one in an older 2700S box and is about
twice the size of the one in an 800SDA box. Interestingly, the 800SDX
transformer appears to be the larger one as well; did Yaesu start putting
smaller transformers in the SDA boxes?
Thanks,
Doug
K4AC
Running for ARRL SE Division Director
Campaign Website: www.k4ac.com
Campaign Blog: www.k4ac.net
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|