Towertalk
[Top] [All Lists]

[TowerTalk] C31XR

To: <towertalk@contesting.com>
Subject: [TowerTalk] C31XR
From: wa9als@starband.net (WA9ALS - John)
Date: Sat, 27 Oct 2001 20:00:18 -0500
> I didn't have a problem with 20, but the 15M problem seems to occur
> frequently.  Many, including N6BT, will tell you to fool around
> repositioning the red wires between the two driven elements.  I didn't
find
> that to be helpful.  My 15M resonant point was about where yours is.

Mine's at 72 ft on GME aluminum tower, with nothing else at all.  I never
had the 15M problem - flat 1.2:1.  Hardly any effect of the spacing of the
feed wires.

> Aluma crank-up. I have a 13b2 cc about 3.5 ft above it with a Diamond
> triband vertical(6,2,440) above that. Its being fed with 100ft of 9913f
> (brand new). I measured it at 25 ft and up about 60ft and the results were
> the same measuring with a MFJ 269

I was advised to put the EF240 (if I ever got one) at least 8-10 ft above
the C31XR.  Part of the problem has to be the close spacing of the yagi's.





List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>