BTDT except used 500' spools cuz I could carry them. I small-split-bolted
the ends for a "continuous" run. Stripped the insulation at the center and
big-split-bolted the radials together in 4 groups.
Next came 2 months of ignoring neighbors' stares and township notices, all
for not mowing the grass.
It's a one-ohm-ground at some frequency.
Works fine, fails safe, drains to the bilge.
73, Dave, N3HE
----- Original Message -----
From: "Eric Rosenberg" <wd3q@starpower.net>
To: <topband@contesting.com>; <towertalk@contesting.com>
Sent: Monday, June 21, 2004 5:40 PM
Subject: [TowerTalk] Technique for Putting Don Radials?
> At a recent PVRC meeting, an interesting method for laying down lots of
> radials for a vertical. Instead of cutting each radial individually and
> attaching each piece to the vertical section, this technique involved
SNIP
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|