Towertalk
[Top] [All Lists]

Re: [TowerTalk] deep base for MA-550

To: "FireBrick" <w9ol@billnjudy.com>, <gdaught6@stanford.edu>,<towertalk@contesting.com>, "Jim Rhodes" <k0xu@iowadsl.net>
Subject: Re: [TowerTalk] deep base for MA-550
From: "Jerry Keller" <k3bz@arrl.net>
Date: Sat, 4 Oct 2003 21:21:45 -0400
List-post: <mailto:towertalk@contesting.com>
You may be right for a cylinder....but he said 2.5 x 2.5 x 5.... that's not a 
cylinder.  Still, the calcs (1.157 vs 1.25) are not that much different. :-)  
Jerry K3BZ
  ----- Original Message ----- 
  From: FireBrick 
  To: Jerry Keller ; gdaught6@stanford.edu ; towertalk@contesting.com ; Jim 
Rhodes 
  Sent: Saturday, October 04, 2003 9:01 PM
  Subject: Re: [TowerTalk] deep base for MA-550


  I can't do that fancy math.
  But as a retired mason contractor...I can use a concrete calculating slide
  rule.
  (The redimix outfits used to hand them out free and you may ask your
  supplier, they may give you one)
  But...
  having said that,
  My calculator says that a 2"6" diameter pier, 5' deep would be 1 1/4 yards.

  (we used to figure, 6 wheelbarrows to a yard for how much pushing would be
  required)


  ----- Original Message ----- 
  From: "Jerry Keller" <k3bz@arrl.net>
  To: <gdaught6@stanford.edu>; <towertalk@contesting.com>; "Jim Rhodes"
  <k0xu@iowadsl.net>
  Sent: Saturday, October 04, 2003 7:40 PM
  Subject: Re: [TowerTalk] deep base for MA-550


  There are 27 cu ft in 1 cu yd (3 ft x 3 ft x 3 ft)...so 2.5 ft x 2.5 ft x
  5.0 ft = 31.25 cu ft... divided by 27 cu ft = 1.157 cu yd.  Jerry K3BZ
    ----- Original Message ----- 
    From: Jim Rhodes
    To: gdaught6@stanford.edu ; towertalk@contesting.com
    Sent: Saturday, October 04, 2003 8:19 PM
    Subject: Re: [TowerTalk] deep base for MA-550


    Hold on here. Isn't the formula pi*r^2*h=v? My calc says about 78.5 cu ft
    or 2.9 cu yds.

    Oh, I'm sorry. I just noticed the @stanford.edu.

    At 05:18 PM 10/4/03, gdaught6@stanford.edu wrote:
    >On 4 Oct 2003 at 11:47, David Giuliani wrote:
    >
    > > I'm installing a concrete base for a Universal Towers MA-550.  The
    > > mfg's dwg calls for a base 2.5' x 2.5' x 5' deep in undisturbed soil,
    > > using 2.5 cubic yards.
    >
    >I calculate under 1.25 cubic yards for that hole.  You're going to
    >have a LOT of concrete left over.  3' x 3' x 6' is two yards.
    >
    >73,
    >
    >
    >
    >
    >_______________________________________________
    >
    >See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
    >Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with
    >any questions and ask for Sherman, W2FLA.
    >
    >_______________________________________________
    >TowerTalk mailing list
    >TowerTalk@contesting.com
    >http://lists.contesting.com/mailman/listinfo/towertalk

    Jim Rhodes K0XU
    jim@rhodesend.net
    _______________________________________________

    See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
  Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
  questions and ask for Sherman, W2FLA.

    _______________________________________________
    TowerTalk mailing list
    TowerTalk@contesting.com
    http://lists.contesting.com/mailman/listinfo/towertalk
  _______________________________________________

  See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
  Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
  questions and ask for Sherman, W2FLA.

  _______________________________________________
  TowerTalk mailing list
  TowerTalk@contesting.com
  http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>