Alan,
I have an AlfaSpid "rotor" mounted in my HDX555 and had no trouble getting
it in.
Pat, K8PC
----- Original Message -----
From: "Alan NV8A" <nv8a@att.net>
To: "towertalk reflector" <towertalk@contesting.com>
Sent: Sunday, September 24, 2006 2:16 PM
Subject: [TowerTalk] Will AlfaSpid rotator fit in US Tower?
> As I read the specs of the US Tower HDX-555 I intend to buy and measure
> the AlfaSpid rotator I already have (purchased when I was thinking of a
> different tower), I am wondering whether the bracing on the top section
> of the tower will allow the AlfaSpid to be installed. It's not the
> diameter of the AlfaSpid that concerns me but the height: the AlfaSpid
> is very tall, and I'm wondering whether there will be room to get it
> between the braces and turn it into the right position.
>
> Alan NV8A
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|