Towertalk
[Top] [All Lists]

[TowerTalk] Simming pool Ufer ground

To: <towertalk@contesting.com>
Subject: [TowerTalk] Simming pool Ufer ground
From: k4bet@bellsouth.net (Paul McInnish - K4BET)
Date: Sat, 14 Jul 2001 19:55:39 -0400
Same here... we have had 3 pools put in over the last several years at
different locations (2 in GA & 1 in NJ) and codes required the entire rebar
cage be bonded around the circumference with one continuous length of large
copper wire, ground rods driven and tied to AC Utility ground.


----- Original Message -----
From: "Gary J. Ferdinand W2CS" <w2cs@ipass.net>
To: "TowerTalk" <towertalk@contesting.com>
Sent: Saturday, July 14, 2001 4:58 PM
Subject: RE: [TowerTalk] Simming pool Ufer ground


|
| When I had a pool installed in NY (years ago), part of the electrical code
| stated that the contractor had to bind the rebar around the entire pool
with
| one continuous length of wire and then ground that (I have long forgetten
| the rules behind the actual grounding itself).  There were specially
| designed clips/fasteners that assured good contact with this continuous
wire
| and the rebar, which was under the path around the pool, and the pool
metal
| surfaces themselves.
|
| Your questions might have answers in the electrical codes.
|
| 73,
|
| Gary W2CS
| Apex, NC
|
|
|
| | -----Original Message-----
| | From: owner-towertalk@contesting.com
| | [mailto:owner-towertalk@contesting.com]On Behalf Of Milcarsky
| | Sent: Saturday, July 14, 2001 3:40 PM
| | To: TowerTalk
| | Subject: [TowerTalk] Simming pool Ufer ground
| |
| |
| |
| | I am currently building a new home and I plan to place a perimeter
ground
| | around the house and this will also encircle the pool.  The pool
| | is adjacent
| | to the house.
| |
| | My contractor raised the question of whether I should connect the
| | perimeter
| | ground to the rebar that forms the pool structure.  He says the rebar
will
| | be tied together with wire. ( I doubt that I will be able to get in and
| | assure these are good electrical contacts though.)  Any thoughts?
| |
| | Also, should we drive a ground rod or two into the ground at the bottom
of
| | the pool and tie these into the rebar cage?
| |
| | The QTH is Florida east coast, 3 miles from the ocean.  The
| | ground is sandy,
| | fairly dry, and the water table is 30 to 40 feet deep.
| |
| | Comments and suggestions will be appreciated.
| |
| | Thanks,  Ed   KG4ARN
| |
| |
| |
| |
| | List Sponsor: Are you thinking about installing a tower this
| | summer? Call us
| | for information on our fabulous Trylon Titan self-supporting
| | towers - up to
| | 96-feet for less than $2000! at 888-833-3104 <A
| | HREF="http://www.ChampionRadio.com";>
| | www.ChampionRadio.com</A>
| |
| | -----
| | FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
| | Submissions:              towertalk@contesting.com
| | Administrative requests:  towertalk-REQUEST@contesting.com
| | Problems:                 owner-towertalk@contesting.com
| |
| |
|
|
| List Sponsor: Are you thinking about installing a tower this summer? Call
us
| for information on our fabulous Trylon Titan self-supporting towers - up
to
| 96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
| www.ChampionRadio.com</A>
|
| -----
| FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
| Submissions:              towertalk@contesting.com
| Administrative requests:  towertalk-REQUEST@contesting.com
| Problems:                 owner-towertalk@contesting.com
|



List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A 
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>