Towertalk
[Top] [All Lists]

Re: [TowerTalk] zinc chromate, was Aluminum radials

To: "'Nick Pair'" <daweezil2003@yahoo.com>,"'Dubovsky, George'" <George.Dubovsky@andrew.com>,<towertalk@contesting.com>
Subject: Re: [TowerTalk] zinc chromate, was Aluminum radials
From: "JC Smith" <jc-smith@comcast.net>
Date: Fri, 14 Jul 2006 13:57:55 -0700
List-post: <mailto:towertalk@contesting.com>
Sorry about that... hit the wrong key and sent an incomplete message.  Here
we go again:

Hi Nick,

I have a 4' Andrew dish (aluminum) and I painted it with regular, gray,
zinc-rich primer... same stuff I use on steel.  It's been up for about 15
years and still looks OK (maybe a bit faded but the paint is still
sticking).  I didn't do any special prep or remove the old paint, just a
light sanding and sprayed it on.

73 - JC, K0HPS


-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com]On Behalf Of Nick Pair
Sent: Friday, July 14, 2006 11:59 AM
To: Dubovsky, George; towertalk@contesting.com
Subject: Re: [TowerTalk] zinc chromate, was Aluminum radials

Hi Geo,

  The older I get the more things that "was".;-)
  Thanks for the heads up on the chromate family of primers.
  I don't need a lot right now so I guess I'll peruse the paint stores and
see what they have. We have a wholesaler here that stocks just about
everything automotive, commercial, and industrial that will whine about the
Small quantity I want but will sell it to me anyway.

  73
  Nick
  WB7PEK

"Dubovsky, George" <George.Dubovsky@andrew.com> wrote:
  Nick,

Good luck on finding good old zinc chromate primer (the pale yellow stuff);
I haven't seen it in quite a few years - the chromate part doomed it. It was
replaced by zinc phosphate, which is pretty good primer, but even it is
getting difficult to find, around here anyway. Automotive paint stores (and
probably others) sell etching primers that seem to work pretty good on
aluminum. Don't know what's in them, but they are not particularly cheap.

73,

geo - n4ua

> -----Original Message-----
> From: towertalk-bounces@contesting.com [mailto:towertalk-
> bounces@contesting.com] On Behalf Of Nick Pair
> Sent: Friday, July 14, 2006 2:02 PM
> To: Bill Turner; towertalk@contesting.com
> Subject: Re: [TowerTalk] Aluminum radials
>
> Yes I have heard of this. Years ago when I used it I think it was called
> zinc chromate and was a primer for aluminum. This maybe different to what
> you refer to, but I have also seen the stuff in aircraft and surplus
> military radio gear( the jungle proofing was different) on Al panels. I
> don't think it would survive the direct burial test because somewhere it
> would be scratched and breakdown at that point. I've never seen a
> conductor with this type of coating but it maybe in use somewhere. ;-)
>
> Thanks for reminding me of this product. I have some aluminum I was
> thinking of painting ( bare aluminum dish on tower to stop corrosion in
> the acidic rain we have here) with spray paint and was wondering if it
> would stick. I know it will over chromate primer.
>
> 73
> Nick
> WB7PEK
>
> ORIGINAL MESSAGE:
>
> On Fri, 14 Jul 2006 00:38:43 -0700 (PDT), you wrote:
>
>
> >
> > Aluminum is a wonderful metal, they just haven't yet figured out how to
> make it hard and corrosion resistant and still high conductivity.
>
> ------------ REPLY SEPARATOR ------------
>
> Actually they have figured it out. The chromate conversion coating
> process makes aluminum corrosion proof even in a high temperature salt
> spray environment, and the coating is highly conductive. It's widely
> used in the aircraft industry but may not be practical for radials.
>
> Bill, W6WRT
>
>
>
> ---------------------------------
> Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great
> rates starting at 1¢/min.
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>


----------------------------------------------------------------------------
--------------------
This message is for the designated recipient only and may
contain privileged, proprietary, or otherwise private information.
If you have received it in error, please notify the sender
immediately and delete the original. Any unauthorized use of
this email is prohibited.
----------------------------------------------------------------------------
--------------------
[mf2]



---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls.  Great rates
starting at 1¢/min.
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>