[Towertalk] Rohn 25 Guy Bracket/Torque Arm Question

To:	<towertalk@contesting.com>
Subject:	[Towertalk] Rohn 25 Guy Bracket/Torque Arm Question
From:	n2mg@eham.net (Mike Gilmer, N2MG)
Date:	Wed, 18 Sep 2002 22:22:44 -0400

Look at the pic in the middle left side for the correct placement.

http://www.rohnnet.com/rohnnet2001/catalog/pdfs/25G/25G-15.pdf

Nice drawing, but what it doesn't show is the "bump" in the guy bracket
horizontals where they pass over the z-brace at the tower welds (would be to
the right in the drawing).

Mike N2MG

<Prev in Thread]	Current Thread	[Next in Thread>
[Towertalk] Rohn 25 Guy Bracket/Torque Arm Question, (continued) [Towertalk] Rohn 25 Guy Bracket/Torque Arm Question, Stan & Patricia Griffiths [Towertalk] Rohn 25 Guy Bracket/Torque Arm Question, w2fca@cs.com [Towertalk] Rohn 25 Guy Bracket/Torque Arm Question, Mike Gilmer, N2MG [Towertalk] Rohn 25 Guy Bracket/Torque Arm Question, w2fca@cs.com [Towertalk] Rohn 25 Guy Bracket/Torque Arm Question, na9d@speakeasy.net [Towertalk] Rohn 25 Guy Bracket/Torque Arm Question, kk9a@arrl.net [Towertalk] Rohn 25 Guy Bracket/Torque Arm Question, Jon Zaimes AA1K [Towertalk] Rohn 25 Guy Bracket/Torque Arm Question, K7LXC@aol.com [Towertalk] Rohn 25 Guy Bracket/Torque Arm Question, na9d@speakeasy.net [Towertalk] Rohn 25 Guy Bracket/Torque Arm Question, K7LXC@aol.com [Towertalk] Rohn 25 Guy Bracket/Torque Arm Question, Mike Gilmer, N2MG <=

Previous by Date:	[Towertalk] US Towers..GREAT Support !!!!!, Jerry Plemmons
Next by Date:	[Towertalk] creating ground "surround" of house: Obstacle, Bill Hider
Previous by Thread:	[Towertalk] Rohn 25 Guy Bracket/Torque Arm Question, K7LXC@aol.com
Next by Thread:	[Towertalk] EMOTO Antenna Co. Model EV700D5X, Heiko Schön
Indexes:	[Date] [Thread] [Top] [All Lists]