If you decide to use solid copper strap instead of braid, you can get some
nice flat solid copper by slicing a piece of copper water pipe lengthwise
and flattening it out.... I've used a Dremel tool with a rotary blade, but
there are other ways.... a little work, but in some locations it's faster
and easier than looking for a local strap source. GL...Jerry K3MGT
----- Original Message -----
From: Mike Wapner <MWapner@Vetronix.com>
To: <towertalk@contesting.com>
Sent: Monday, June 18, 2001 2:53 PM
Subject: [TowerTalk] Braided Ground Strapping
> Does anyone know of a good source for copper braid (solder plated or not)
> ground strapping?
>
>
>
> List Sponsor: Are you thinking about installing a tower this summer? Call
us
> for information on our fabulous Trylon Titan self-supporting towers - up
to
> 96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
> www.ChampionRadio.com</A>
>
> -----
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
>
>
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|