Towertalk
[Top] [All Lists]

Re: [TowerTalk] 5 x conductor rotor cable ?

To: "Jim Thomson" <jim.thom@telus.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] 5 x conductor rotor cable ?
From: "Mark Robinson" <markrob@mindspring.com>
Date: Mon, 25 Oct 2010 10:27:30 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
The wireman sells the cable for the Orion rotator. It has a thick black and 
a thick white wire for the dc motor and then has a shielded set which are 
wrapped in foil. Inside the foil is a bare drain lead and a thin red and a 
thin blue wire.

Maybe not enough wires for you.


Mark N1UK


----- Original Message ----- 
From: "Jim Thomson" <jim.thom@telus.net>
To: <towertalk@contesting.com>
Sent: Monday, 25 October, 2010 10:16 AM
Subject: [TowerTalk] 5 x conductor rotor cable ?


> Who makes  5 x conductor rotor cable ?    I need 175'  for the small PP. 
> 3 x BIG wires and 2 x small ones.
> These small PP's have a com/CW/CCW  for the dc motor which sucks 7-8 A . 
> And 2 x small wires  for the
> magnetic pulses  for the digital readout.   Something like 3 x 12 ga's  + 
> 2 x 20 ga's would be ideal.  It has
> to be flexible enough for a crank up.  Does it even exist ?
>
> Tnx... Jim   VE7RF
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>