Towertalk
[Top] [All Lists]

[TowerTalk] TIC rotator assembly

To: <towertalk@contesting.com>
Subject: [TowerTalk] TIC rotator assembly
From: n3rr@erols.com (Bill Hider)
Date: Tue, 12 Jun 2001 04:30:23 +0100
Steve,

I've installed them (5 of them) by myself, with only me on the tower, with a
ground crew that hauled up parts as I asked for them.
These were the large 1032 models.  The smaller model 1022 should be much
easier.

Bill, N3RR

----- Original Message -----
From: <K7LXC@aol.com>
To: <towertalk@contesting.com>
Sent: Tuesday, June 12, 2001 5:23 AM
Subject: [TowerTalk] TIC rotator assembly


> Howdy, TowerTalkians --
>
>     While I've taken a TIC ring rotator down, I've never installed one.
Can
> one person on the tower install it by himself or does it take two people?
I
> suspect two since it appears that there's a bunch of times you might need
3
> or 4 hands during the installation. Tnx for your input.
>
> Cheers,     Steve    K7LXC
> Tower Tech
>
> List Sponsor: Are you thinking about installing a tower this summer? Call
us
> for information on our fabulous Trylon Titan self-supporting towers - up
to
> 96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
> www.ChampionRadio.com</A>
>
> -----
> FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
>


List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A 
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>