Towertalk
[Top] [All Lists]

[TowerTalk] Cable loss

To: <towertalk@contesting.com>
Subject: [TowerTalk] Cable loss
From: aa0cy@nwrain.com (Bob Wanderer)
Date: Sat, 26 Jun 1999 11:12:11 -0700
PVC pipe won't stop radiation. My experiences
with ladder line lead me to prefer coax. I would
suggest 9913 (which is a bear to work with) or
better still Times Microwave LMR cable which is
less expensive than Andrews Heliax(TM) and
has lower attenuation than RG8. DavisRF has
good low-loss coax alternatives. If you can afford
the connectors, go with the larger sized LMR or
Heliax(TM); say 7/8" or larger.

Maybe you can locate the amp by the tower and
remotely tune it!

73,
Bob AA0CY

----------
From:  Rod Brink[SMTP:rodbrink@montereybay.com]
Sent:  Tuesday, June 22, 1999 5:32 PM
To:  towertalk@contesting.com
Subject:  [TowerTalk] Cable loss


Will shortly be running an underground feedline about 150' to my 17M
antenna.  I've got a nice roll of RG-8 that I'd like to use, but the 1.95 dB
loss means that 36% of my power will be wasted in heating the coax.  (And
that's only if SWR=1:1).  Am instead thinking about running 450 ohm ladder
line with 9:1 transformers each end.  Anybody got any better ideas??

73, Rod





--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm



--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>