Towertalk
[Top] [All Lists]

[TowerTalk] Protectant for beam connections

To: "TowerTalk" <towertalk@contesting.com>
Subject: [TowerTalk] Protectant for beam connections
From: "WA4MWM" <wa4mwm@triad.rr.com>
Date: Thu, 4 Nov 2004 19:34:40 -0500
List-post: <mailto:towertalk@contesting.com>
I am finalizing the assembly of some Force 12 beams. Where the balun attaches to the driven elements and where element jumpers are installed (bolts through the elements attached to balun leads with ring connectors - mostly #10 and 1/4" size), they recommend "spraying" the contacts to protect them from moisture, corrosion, etc.

What is recommended to use for this? I need to make this as permanent as possible since this area will be inaccessible after installation without a crane and personnel bucket.

Thanks,

Cliff
NC4CB
Winston-Salem, NC


_______________________________________________

See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>