>"You'd be way better off with just a dipole (EZNEC says 22 - j600 ohms for a
>44 foot element) and either..."
I agree with Dave's loss numbers for 44 ft element length.
However, before giving up and using a shortened 44 ft. dipole, you may want to
see if there's a way get the elements lengthened close to a halfwave and still
keep spacing at 0.1 wavelength. Perhaps bring the ends down if you're
maxed-out on horizontal space. If you can, then you can use my prior message
as a guide for system loss. I would still model it with the hanging ends.
Otherwise, the 44 ft length on 40m is going to be a real looser with the 8KJ as
the added element really drives the impedance down from mutual coupling and the
short element length makes it too reactive to keep losses low, even when trying
to match at the feedpoint.
Paul, W9AC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|