Hello Jeff!
I have used the Top Ten switch to switch between transceivers. These
switches have at least 80 dB of isolation and work very well.
Here is the link:
http://www.qth.com/topten/abss.htm
73!
Tim K3LR
http://www.k3lr.com
K3LR DX Cluster telnet://dx.k3lr.com
Good Luck and
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Jeff Stevens
Sent: Sunday, May 04, 2008 4:11 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Coax Switch for Two Radios and One Antenna
Looking at the Alpha Delta coax switches, I see the "Application
Information" notes that the switch can be used with two receivers and
one antenna. The use of two *transceivers* with one antenna is
conspicuously absent.
What switching options are available to allow the switching of one
antenna between two transceivers? I'm looking for a manual switch for
use right in the shack.
Tired of re-arranging jumpers all of the time. :^)
-Jeff
KE7FRJ
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|