Towertalk
[Top] [All Lists]

Re: [TowerTalk] G5RV balun question

To: "Joseph or Ruth Patrick" <hdmc38@bellsouth.net>
Subject: Re: [TowerTalk] G5RV balun question
From: "John G." <af5cc@fidmail.com>
Date: Fri, 11 May 2012 04:39:13 -0000
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Hi Joe,

Thanks for the email. I figured I was just looking at a way to improve it. If 
it does reduce noise some, then it was worth it.

73 John AF5CC
  ----- Original Message ----- 
  From: Joseph or Ruth Patrick 
  To: John G. 
  Cc: towertalk@contesting.com 
  Sent: Friday, May 11, 2012 2:24 AM
  Subject: Re: [TowerTalk] G5RV balun question


  Good Evening John

   I would ask you after using your antenna system for 14 years with good 
results why are you considering adding a coax choke? Are you having a problem 
with RF in the shack? Are you having a noise problem that you did not have 
before? To answer your question if there is RF coming back down the shield coax 
choke may help reduce this. As to the noise if it is being caused by the first 
problem then fixing the first problem should help with problem #2.
  The reason I ask this is I have had the same coax, feed line, balun, and HF 
antenna now for about 9 years. It also works very well and always has.
  I look at it like this. If it ain't broke don't try to fix it. Now if you are 
trying to improve on the system then You may get some different answers. This 
is JMHO. Good luck and let us know how you make out.
   
  73 DE K4XZ Joe Patrick
  God Made Man
  Sam Colt Made Them Equal 





------------------------------------------------------------------------------
  From: John G. <af5cc@fidmail.com>
  To: ham-antennas@yahoogroups.com; towertalk@contesting.com
  Sent: Thu, May 10, 2012 5:39:54 PM
  Subject: [TowerTalk] G5RV balun question

  I have a homebrew G5RV type antenna.  The antenna wire is fed with 300 ohm 
radio shack twin lead, which runs to a Van Gorden HI-Q 4:1 balun, which then 
feeds RG-11 75ohm coax.  I have used this system for 14 years now with good 
results. I am wonder if adding a coax choke balun (several turns of coax wound 
up in a circle) would help at all. I would like to minimize RF on the shield of 
the coax (as well as noise it would pick up) and think the HI-Q balun should do 
this, but would the coax choke help as well, or just be redundant?

  John AF5CC
  _______________________________________________



  _______________________________________________
  TowerTalk mailing list
  TowerTalk@contesting.com
  http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>