I am using the Champion clamp and have had no problems with it. I noticed
that the Champion u bolts were a little too short to put spring washers
under the u-bolt nuts, so I used blue loctite to make sure that the nuts
couldn't vibrate loose. So far so good. I don't expect any problems with the
nuts coming loose.
Mark N1UK
----- Original Message -----
From: "Dick Hanson" <dick@dkhanson.com>
To: <towertalk@contesting.com>
Sent: Thursday, 03 March, 2011 5:18 PM
Subject: [TowerTalk] champion radio replacement clamp for orion 2800
> Hello....
>
> I am presently using four of the 2800s, ground-mounted to turn rotating
> towers.
> I'm having some problems getting the orion clamps to stay 'tight' on the
> sprocket shafts (2" solid steel shafts).
>
> I would appreciate hearing from anyone who has actually made the change
> from
> orion to champion shafts.
> Don't need theories....need real, live experiences.
>
> Thank you.
> Dick, K5AND
> Austin, TX
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|