Towertalk
[Top] [All Lists]

Re: [TowerTalk] 40 and 20 at 15 ft apart

To: "towertalk@contesting.com" <towertalk@contesting.com>
Subject: Re: [TowerTalk] 40 and 20 at 15 ft apart
From: GALE STEWARD <k3nd@yahoo.com>
Reply-to: GALE STEWARD <k3nd@yahoo.com>
Date: Tue, 30 Aug 2011 05:58:24 -0700 (PDT)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Chuck is correct. A 40 and a 15 on the same tower/mast will definitely NOT 
work.  We tried it once at W3GM's station. The 40M yagi worked fine but the 15 
was pretty much useless due to the severe interaction.


73, Stew K3ND




________________________________
From: Chuck <w5pr@swbell.net>
To: ""Felipe J. Hernández"" <fhdez@vpnet.net>; towertalk@contesting.com
Sent: Monday, August 29, 2011 4:32 PM
Subject: Re: [TowerTalk] 40 and 20 at 15 ft apart

I think 40 and 15 on the same tower is the problem.

Chuck W5PR

----- Original Message ----- 
From: ""Felipe J. Hernández"" <fhdez@vpnet.net>
To: <towertalk@contesting.com>
Sent: Sunday, August 28, 2011 6:13 PM
Subject: [TowerTalk] 40 and 20 at 15 ft apart


> Guys,
>
> Theres a great  benefit from turning the antennas 90 deg off.
> but Ive heard that, when you have a 40 and a 20 on the same tower, the
> interaction
> is never dissipated by the 90 deg offset.
>
> Is that true?
>
> Thinking of setting up a xm240 with a 3 or 4 el force 20 mtr monobander
> abt 15 ft apart..
>
> Thanks
>
> Felipe
> NP4Z
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>