Thanks, I should have mentioned, I do have a small tractor and welded up
a fork lift for it this summer. I suppose I could put straps around the
base section and pull if off the ground with the fork lift rather than
try and man-handle it onto to the top of the fork lift.
Good suggestion!
On Thu, Sep 3, 2015, at 02:44 PM, Charles Farr wrote:
> An engine hoist/crane can easily lift that weight and if the ground
> isn't too rough you can move it around. Do it on the driveway it you can.
>
> W6AJW
>
> On 09/03/2015 02:31 PM, dw wrote:
> > I have made the purchase of an AB-621/G mast from a surplus supplier.
> > The unit should arrive next week.
> >
> > I haven't seen it up close yet, so I'm wondering how much I'll need to
> > disassemble it in order to be able to move it.
> > The shipping crate is close to 400lbs.
> > There are supposed to be 3 boxes in the crate.
> > So some of that weight will come out in separate boxes.
> > But the 8 feet long base section all by itself might weight close to 150
> > lbs.
> >
> > Has anyone assembled or worked with one of these?
> > Thanks
> > N1BBR
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
--
Bw_dw@fastmail.net
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|