Towertalk
[Top] [All Lists]

Re: [TowerTalk] Pipe for guy anchor

To: "N0VT@outlook.com" <N0VT@outlook.com>, "towertalk@contesting.com" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Pipe for guy anchor
From: "Jon Zaimes, AA1K via TowerTalk" <towertalk@contesting.com>
Reply-to: "Jon Zaimes, AA1K" <jz73@verizon.net>
Date: Tue, 9 Aug 2022 17:58:36 +0000 (UTC)
List-post: <mailto:towertalk@contesting.com>
I've installed dozens of towers with elevated guy posts, for myself and others. 
Some have been in service 25+ years.
Steel I or H beams are my favorite, typically 3x6" size or bigger, 10-12' total 
length with 4-6 feet in concrete (weigh about 125-150 lbs). Typically bore hole 
with auger 8-12" diameter. Cut top at diagonal to accommodate turnbuckle 
attachment (see pic under "towers" tab on my website). Some have 5/8" threaded 
rod to hold the turnbuckle. 
Earlier ones used 3.5 to 4 " steel pipe filled with concrete. 5/8" threaded rod 
for attachment. One of these had 2.5" pipe inside of it extending up another 8 
feet or so to get lower guy above truck height across driveway.
Galvanized is nice but hard to find at local salvage yards. Most are painted.
Have used these on 100' Rohn 25, 45 and 55.
Local grain elevator has a massive I beam about 25 ft high for one of its guys 
to allow truck traffic to clear.
73/Jon
Jon P. Zaimes, AA1KTower climber for hireFelton, 
Delawarehttp://www.aa1k.us/Cell: 302-632-2353 Reviews of AA1K tower work on 
eham website: http://www.eham.net/reviews/detail/12922 Hug your favorite tower 
every day, and always stay connected to it.

-----Original Message-----
From: Rick Harrington N0VT <N0VT@outlook.com>
To: towertalk@contesting.com
Sent: Tue, Aug 9, 2022 8:34 am
Subject: [TowerTalk] Pipe for guy anchor

I have a small lot and my tower is 70' of 25G.  Due to some obstacles in 
the yard that can't be worked around I need to sink some metal pipe in 
concrete and attach the guys about 6 feet up instead of taking them down 
to the ground.  I realize this isn't the preferred situation.

What type of pipe should I be looking for?

Thanks, Rick N0VT
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>