On Sun, 6 Dec 1998 18:48:26 -0800 (PST) Pat Barthelow <aa6eg@hh.tmx.com>
writes:
>
>
>Hello, Dave, et Tower talkians....
>
>I wonder if the approximately 10% (.032") diameter change in the
>capacitor
>tubing will have significant effect on tuning/performance of the
>KT-34XA?
That's a good point. If the INSIDE diameter of the tubing is
different from KLM original, it would throw off the capacitance.
The KT-34XA is complicated enough already without introducing
this additional uncertainty. If the I.D. is different at all,
I would recommend getting the tubing (and some unreamed caps)
from KLM.
Dave Hachadorian, K6LL
Yuma, AZ
K6LL@juno.com
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|