Towertalk
[Top] [All Lists]

[TowerTalk] Stacked tri-banders and 40m dipole - which antenna where?

To: <towertalk@contesting.com>
Subject: [TowerTalk] Stacked tri-banders and 40m dipole - which antenna where?
From: k6ll@juno.com (k6ll@juno.com)
Date: Wed, 11 Aug 1999 11:12:37 -0600


On Tue, 10 Aug 1999 22:17:17 -0700 "Dan Levin" <djl@andlev.com> writes:
>
>My main antenna system will be a 2 stack of 4 element 20' boom 
>tri-banders,
>and a shorty forty rotatable dipole. 

Another option is to put the top tribander AND the 40 dipole
at 85', with the dipole parallel to the tribander boom. The
20' tribander boom shouldn't affect the dipole, especially if the
tribander elements are insulated from the boom. The dipole won't
affect the tribander, since it's at right angles. The dipole won't
directly add to
the windload, since it's at right angles to the tribander
elements, which is usually the worst-case wind direction for
a yagi. This option will also allow you to hang your lowband
wires from the mast at about 83 feet, using one of the
methods discussed here recently.

Since you are in California, 55' is a good height for your
lower antenna, and 30' is a good stacking distance for a
small tribander.


Dave Hachadorian, K6LL
San Diego, CA
K6LL@juno.com





















___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>