Towertalk
[Top] [All Lists]

[TowerTalk] 3/16 EHS and Grips

To: <towertalk@contesting.com>
Subject: [TowerTalk] 3/16 EHS and Grips
From: n4kg@juno.com (n4kg@juno.com)
Date: Tue, 12 Jun 2001 17:22:30 -0600
I use the small rectangular insulators, 2.5 inches long,
1.5 inches across the diagonals, 1.0 inch across grooves,
with my 3/16 inch Big Grips.  I "reform" the radius of the
grips using a rubber mallot after twisting a couple of turns
to hold the sides together.  Place the looped end on a piece
of wood to protect the bottom side while whacking with the
rubber mallot.  It takes about 6 whacks with the rubber mallot
(or 3 or 4 whacks with a 3 lb hammer).  A properly reformed
grip will just fit in the grooves.  I know, it is a violation of the
"Prime Directive".  None of my 7 towers have fallen down in
20+ years and several very high wind events (tornado, etc).

de  Tom  N4KG

On Tue, 12 Jun 2001  Stan or Patricia Griffiths <w7ni@easystreet.com>
writes:

> Does anyone know if ordinary 3/16" EHS with Guy Grips can be
> used with 500D insulators or do they have to be 502's?
> 
> I have never seen a 3/16" guy grip . . .
> 
> Stan
> w7ni@easystreet.com
> 
> 
> 

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A 
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>