Towertalk
[Top] [All Lists]

[TowerTalk] Thrust bearing

To: <towertalk@contesting.com>
Subject: [TowerTalk] Thrust bearing
From: k3hx@juno.com (tttt ccccc)
Date: Tue, 11 Sep 2001 10:16:50 -0400
OM,

I used an automotive  clutch "throw-out" bearing.  

If you can find a patient  parts store clerk (try a NAPA store) a
suitable device 

can be found as you will have to try a number to find one with the proper
sized

hole.

The bearing is a very heavy duty "lazy susan" bearing and will need to be
welded

to some manner of adaptor plate.  Weather was not a problem as I painted
mine and

it held up fine as long as it was up.

73

Tim  K3HX

CW Elitist

QRP Snob (except on 160 where I'm an amp-running philistine)

Old Fart

20 WPM Extra

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>