Towertalk
[Top] [All Lists]

[TowerTalk] AL-1200 arcing during QRO RTTY contesting

To: <towertalk@contesting.com>
Subject: [TowerTalk] AL-1200 arcing during QRO RTTY contesting
From: n4kg@juno.com (n4kg@juno.com)
Date: Thu, 4 Oct 2001 18:24:32 -0600
You spoke of a loose coax connector.

Do you HAND tighten them?

If so, you need to use pliers
to get them really tight.

Heat will cause metal to expand and
could loosen a connector that was not really tight
to begin with.

A bad connection can result in high SWR
which creates HIGHER  VOLTAGES in the
amplifier / output network / bandswitch.

Tom  N4KG



________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>