[Towertalk] Driving ground rods

To:	<towertalk@contesting.com>
Subject:	[Towertalk] Driving ground rods
From:	kg4chx@telocity.com (kg4chx@telocity.com)
Date:	Thu, 18 Apr 2002 08:40:39 -0700 (PDT)

Try using a rotary hammer drill with drill action
turned off, Drives them right in here in NC red clay.
Tim KG4CHX

<Prev in Thread]	Current Thread	[Next in Thread>
[Towertalk] driving ground rods, (continued) [Towertalk] driving ground rods, Paul McInnish - K4BET [Towertalk] driving ground rods, Thomas Beltran [Towertalk] driving ground rods, Chris BONDE [Towertalk] driving ground rods, <k4oj@tampabay.rr.com (Jim White) [Towertalk] driving ground rods, Tom Anderson [Towertalk] driving ground rods, Mike Fatchett [Towertalk] driving ground rods, Pete Smith [Towertalk] driving ground rods, SavageBR@aol.com [Towertalk] driving ground rods, <res0958z@verizon.net (Bill Otten) [Towertalk] driving ground rods, Chris BONDE [Towertalk] Driving ground rods, kg4chx@telocity.com <= [Towertalk] driving ground rods, Bill Coleman [Towertalk] driving ground rods, Carl Smidt

Previous by Date:	[Towertalk] AB-577 Mast and Windloading, Dan Hammill
Next by Date:	[Towertalk] Coax switch advice?, Don Havlicek
Previous by Thread:	[Towertalk] driving ground rods, Chris BONDE
Next by Thread:	[Towertalk] driving ground rods, Bill Coleman
Indexes:	[Date] [Thread] [Top] [All Lists]