Towertalk
[Top] [All Lists]

Re: [TowerTalk] Yaesu G-2800 Control box

To: "TowerTalk" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Yaesu G-2800 Control box
From: "Keith Dutson" <kdutson@sbcglobal.net>
Date: Thu, 9 Jun 2005 15:19:59 -0500
List-post: <mailto:towertalk@contesting.com>
You should check with the parts counter to validate these part numbers.
It's been several months since I ordered.  These parts are the same for 800,
1000 and 2800 rotors.  Not sure about 2700.

The connector for the other end is VERY high priced:

7 pin rotor connector, Part# S8100639, $48.17.
Rubber boot for 7 pin, Part# S8001501, $ 9.58.

73, Keith NM5G

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Doug Rehman
Sent: Thursday, June 09, 2005 3:05 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Yaesu G-2800 Control box

N5MG wrote:

> Call Yaesu, 714-827-7600 parts dept. to order with VISA/ MC/ AMX.
> 
> 6 pin controller plug, Part# P1091056, $ 1.58.
> Pins for 6 pin (6set), Part# S8101130, $ 1.17.
> Plus shipping.

Would you happen to know the part number(s) for the round plug for the rotor
itself? Are these the same connectors that are used on the G-2700?

Tnx,
Doug
K4DDR


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>