James:
Several ways:
See the following for how Heights suggests doing it for an embedded base:
http://www.heightstowers.com/bases.htm
Also, I designed the fold-over bases for them, which uses standard threaded
anchor bolts (valmont) inconjunction with a "U" shaped weldment, which can
be seen at:
http://www.heightstowers.com/fold_over_kits.htm
The tower legs can be adjusted AFTER the pour to make everything plumb, very
flexible.
73's
Bob, W5LT
-----Original Message-----
From: James E. Lanier [mailto:jelanier@chemroc.com]
Sent: Monday, October 24, 2005 7:47 AM
To: towertalk
Subject: [TowerTalk] Plumbing Universal Tower
The base for the Universal Tower (7-40) is a one shot deal it appears. Any
ideas or solutions to leveling after the fact?
I have not poured yet and I am hoping for the best, but I only have the
bottom section to plumb. Adding sections tends to multiply errors.
I wonder if anyone here has created an adjustable base plate mount for this
type of tower.
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|