Yes ... I'm using "Ton Ten" Switchers for three transceivers and two
additional receivers...no problem...work great..!!
See particial system at ...
http://www.kc4pe.com/amateurshack.htm
-Bill
At 07:33 PM 5/4/2008, Tim Duffy K3LR wrote:
>Hello Jeff!
>
>I have used the Top Ten switch to switch between transceivers. These
>switches have at least 80 dB of isolation and work very well.
>
> Here is the link:
>
>http://www.qth.com/topten/abss.htm
>
>73!
>Tim K3LR
>http://www.k3lr.com
>K3LR DX Cluster telnet://dx.k3lr.com
>
>
>Good Luck and
>-----Original Message-----
>From: towertalk-bounces@contesting.com
>[mailto:towertalk-bounces@contesting.com] On Behalf Of Jeff Stevens
>Sent: Sunday, May 04, 2008 4:11 PM
>To: towertalk@contesting.com
>Subject: [TowerTalk] Coax Switch for Two Radios and One Antenna
>
>Looking at the Alpha Delta coax switches, I see the "Application
>Information" notes that the switch can be used with two receivers and
>one antenna. The use of two *transceivers* with one antenna is
>conspicuously absent.
>
>What switching options are available to allow the switching of one
>antenna between two transceivers? I'm looking for a manual switch for
>use right in the shack.
>
>Tired of re-arranging jumpers all of the time. :^)
>
>-Jeff
>KE7FRJ
>
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
>
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|