Towertalk
[Top] [All Lists]

Re: [TowerTalk] [YCCC] Dual rotor controllers

To: towertalk@contesting.com
Subject: Re: [TowerTalk] [YCCC] Dual rotor controllers
From: k2qmf@juno.com
Reply-to: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Date: Thu, 25 Feb 2010 13:11:25 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Tony,

Thanks for the info.
I will look into this as well...

73,
Ted  K2QMF
 
On Wed, 24 Feb 2010 23:14:41 -0500 "Tony Brock-Fisher"
<barockteer@aol.com> writes:
> Ted-
> 
> My solution was to add an Idiom Press EZ-Rotor mod with serial IO to 
> the 
> rotor control. Now I can control the rotor from any PC on the net. 
> (I 
> actually have all three of my rotor on serial ports).
> 
> -Tony
> 
> ----- Original Message ----- 
> From: <k2qmf@juno.com>
> To: <towertalk@contesting.com>; <yccc@yccc.org>
> Sent: Wednesday, February 24, 2010 7:40 PM
> Subject: [YCCC] Dual rotor controllers
> 
> 
> > Hello All,
> >
> > I asked this question years ago and got replies.
> > However, I can't find them.  Guess they are on an
> > old computer.
> >
> > Anyway,  I would like to know how I can connect
> > two (2) controllers to one antenna rotator???
> >
> > The rotator is a HAM-4 and I have 2 controllers.
> >
> > I want to be able to control the rotor from 2 different
> > operating positions...
> >
> > As I recall, you need to take the fuse out of one of
> > the controllers.  I don't remember anything else...
> >
> >
> > Any help would be very much appreciated.
> > Thank in advance.
> >
> > 73,
> > Ted  K2QMF
> >
> > P,.S. - I tried the archives with no luck.
> > ____________________________________________________________
> > Senior Assisted Living
> > Put your loved ones in good hands with quality senior assisted 
> living. 
> > Click now!
> > 
>
http://thirdpartyoffers.juno.com/TGL2141/c?cp=7EABkAGHgyj9SYLGBMm_uAAAJ1B
nGn6THZj3zb9oqpzij_rqAAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAASUQAAAAA=
> > _______________________________________________
> > YCCC Reflector mailto:yccc@contesting.com
> > Yankee Clipper Contest Club  http://www.yccc.org
> > Reflector Info: http://lists.contesting.com/mailman/listinfo/yccc
> >
> > 
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> rtalk
> 
 
____________________________________________________________
Diet Help
Cheap Diet Help Tips. Click here.
http://thirdpartyoffers.juno.com/TGL2141/c?cp=iWjNNlu12ElJReN_BV5-LwAAJ1BQobnAx2zzdKUb2JrD3w3cAAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAAYQAAAAAA=
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [TowerTalk] [YCCC] Dual rotor controllers, k2qmf <=