I have a pair of stiff trekking boots with steel rods in the sole. They
allow the boot to flex, but keep it stiff enough to stand on a tower
rung for a while. They also have deep tread and a heel notch, which
makes it nice for standing on lattice tower. I do own a shop that sells
these boots, and this would be a shameless plug, except that we're
currently sold out (figures, right). I prefer Scarpa - I think they hold
up better than most of the contemporary brands and the price isn't bad,
but we've also had good luck with Merrill. A higher boot is probably
preferable for support, plus it saves your lower shin and ankle from
abusive crossbars.
So, my suggestion would be a trekking boot (since it is stiffer than a
standard day hiking boot and usually has a leather upper), in a higher
length, with an aggressive tread. Most anything in this class will have
the toe and heel lip (for crampons), which I sort of like for working up
around the mast when its comfortable to wrap a leg around the top tower
section.
Good luck!
Mike N1TA
>
>Steve, I know you have seen lots of posts on TT about climbing belts and
>safety harnesses. I have not seen anything about BOOTS or work shoes of any
>kind. I used to have some boots that I would wear during long outings up a
>tower. But they're shot. What have you or the others found to be
>comfortable when standing on or working up the tower?
>
>- Mike
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|