I don't know how much experience you have working at height. A 12 foot 4x4
is unwieldly even at ground level. A steel pipe is also hard to handle
because of the weight. I have an aluminum gin pole with the standard
mounting hardware. I would suggest you get a regular gin pole or at least a
2inch heavy wall aluminum pipe. Aluminum is cheaper than flesh and bones.
Good luck,
Joe K2UF
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Linux
Mercedes
Sent: Thursday, July 17, 2014 5:57 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Wooden Gin Pole?
I'm finding out that it's rather tricky to get large aluminum pipe out my
way, especially something 12+ feet long.
I was thinking about building one from square steel tube, but I don't know
if that'd be too heavy for me to easily move around the tower, or too heavy
for the tower itself (Rohn 25G).
I also realized that a 12' 4x4 is about $15. If I rig it right so that I
get very little angular loading on it, would that suffice?
Thanks,
--Nathan
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|