Mike's advice is sound.
I use a 2 El Cushcraft 40 that has been in continuous far since 1985.
Terrible winds here, near the Blue Ridge. I have rebuilt it twice through the
years, ordering any needed replacement parts from Cushcraft, and later, MFJ.
Everything fits and works.
MFJ has maintained the HyGain and Cushcraft brands very well.
The antennas are well worth refurbishing.
73 Mike W4AAW
----- Reply message -----
From: "W0MU Mike Fatchett" <w0mu@w0mu.com>
To: <towertalk@contesting.com>
Subject: [TowerTalk] Parts for old Cushcraft 40-2CD 2 el 40 meter beam
Date: Fri, Mar 10, 2017 12:24 AM
I was going to suggest the same. MFJ sells/owns the Cushcraft XM-240
and most of the parts are the same so I suspect you can get spare parts
from them.
W0MU
On 3/9/2017 8:54 PM, RCM wrote:
>> On Mar 9, 2017, at 22:41, Dave Thompson <thompson@mindspring.com> wrote:
>>
>> Gang,
>>
>> I just took down a 1982 Cushcraft 40 meter beam that I upgraded the X hat
>> assemblies in the early 1990's.
>>
>> I need a new brace assembly, a 1 and 1/4" by 72 piece if aluminum for the
>> driven element. The coils are all good but they need to be re-wrapped with
>> high quality tape.
>
> Maybe read this, while it’s down.
>
> http://www.k3lr.com/engineering/moxon/W6NL_Moxon104.pdf
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|