With NEC2 I avoid using short wires. If I had a swedged element I
would use the length of the unswedge portion of the larger tube and
for the next wire I would just add the length of the swedge portion of
this tube to the smaller tube that fits inside it. The 1/8 difference
in diameter for the small overlapping area should not make a
difference on HF and I feel that the segments are more equal and that
the model will be reasonably accurate. Does NEC4 model short segments
more accurately?
John KK9A
jimlux wrote:
but does the model actually show much difference? One can get way down
in the weeds with this - put a tapered segment in that's 1 cm long, etc.
But if the wavelength is 20 meters, a 1 cm transition is 0.0005
wavelength. I'd worry more about numerical instability than model
accuracy at that point.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|